WEST AFRICAN EXPLORATION AND PRODUCTION COMPANY LIMITED (WAEP)
TENDER OPPORTUNITY: PROVISION OF ENVIRONMENTAL & SOCIAL IMPACT ASSESSMENT (ESIA) STUDIES FOR KALAEKULE TO AMENAM-KPONO GAS PIPELINE PROJECT (OML 72)
TENDER REF: WAEP-PCM-TDR-0005-R0I
NIPEX TENDER NO.: WAEP00000026

INTRODUCTION
WAEP hereby announces to interested and prequalified companies an upcoming tendering opportunity for the Provision of Environmental & Social Impact Assessment (ESIA) Studies For Kalaekule To Amenam-Kpono Gas Pipeline Project in Kalaekule Field. The proposed contract will commence in 02, 2021 and remain active for one (1) year duration, with no option for extension.

Please visit the Nigerian Petroleum Exchange Portal www.nipex-ng.com for further details.

SCOPE OF WORK
The Scope of Work shall include but not limited to the provision of an extensive review of existing Environmental Studies or Management Plans for the Fields and Blocks around the areas and other environmental monitoring reports. Subsequently, a systematic two (2) season field and right of ways data gathering exercise of the Kalaekule to Amenam-Kpono pipeline project right of ways to effectively characterize the project environment. Specifically, the work scope shall entail:

SEPLAT PETROLEUM DEVELOPMENT COMPANY PLC
(ON BEHALF OF THE NPDC/SEPLAT JOINT VENTURE)
TENDER OPPORTUNITY: CALL-OFF CONTRACT FOR THE PROVISION OF ACCESS AND LOCATION PREPARATION (MAJOR WORKS) – OMLS 4, 38 AND 41

THE SHELL PETROLEUM DEVELOPMENT COMPANY OF NIGERIA LIMITED
OPERATOR OF THE NNPC/SPDC/TEPNG/AGIP JOINT VENTURE
TENDER OPPORTUNITY: PROVISION OF LIGHT MARINE VESSELS
NIPEX NUMBER – 100004977
TENDER NUMBER – CW300000

1. INTRODUCTION
SHELL hereby announces to interested and prequalified companies an upcoming tendering opportunity for the Provision of Light Marine Vessels. The proposed contract will commence in Q3 2021 and remain active for three (3) years duration.

Please visit the Nigerian Petroleum Exchange Portal www.nipex.com.ng for further details.

2. SCOPE OF WORK/SERVICE REQUIREMENT
Provision of Light Marine Vessels (Landing Crafts and Inshore Personnel Carriers) to support East Inshore operations.
• Landing Crafts
• Length: 13 -17m
• Breath: 3 – 6m
• Max Draft: 0.5m
• Cruising speed: 24 knots
• Fuel Endurance: 12 hours
• Passenger: minimum 12 Pax on padded seats
• Cargo capacity: 15 tons, 15 sqm area
• Propulsion: 2x 250HP (minimum) diesel engines at 1800rpm
• Construction Material: Heavy Duty GRP with Marine Resin
• Personnel Carriers
• Length: 8 -15m
• Breath: 3-6m
• Max Draft: 0.5m
• Cruising speed: 24 knots
• Fuel Endurance: 12 hours
• Passenger: minimum 8 Pax on Padded seats
• Propulsion: 2x 250HP (minimum) diesel engines at 1800rpm
• Construction Material: Heavy Duty GRP with Marine Resin

3. MANDATORY REQUIREMENTS
(1) To be eligible for this tender exercise, interested contractor are required to be pre-qualified as essential service vendor in the NJQS category reference 3.08.02 – Barges Dumb, Self-propelled, Towage (Product/Services) category in NipeX Joint Qualification System (NJQS) data base. Only successfully pre-qualified and live suppliers in this category will receive Invitation to Technical Tender (ITT).
(2) To determine if you are pre-qualified and view product/service category you are listed for, open www.nipexng.com and access NJQS with your login details, click on continue Joint Qualification Scheme tool, click check my supplier status and then click supplier product group.
(3) If you are not listed in a product/service category and you are registered with DPR to do business, contact NipeX office at 8-10 Bayo Kuku, Ikoyi, Lagos with your DPR certificate as evidence for necessary update.
(4) To initiate the JQS prequalification process, access www.nipexng.com to download the application form, make necessary payments and contact NipeX office for further action.
(5) To be eligible, oil tenders must comply with the Nigerian Content Requirements in the NipeX system,
(6) Age of vessels should not be more than 7 years from the manufactured year.
(7) All vessels must meet the INTERNATIONAL MARINE CONTRACTORS ASSOCIATION (IMCA) CMID M 189 for Nigeria Riverine Operations.

TOTAL UPSTREAM NIGERIA LIMITED (TUPNI)
TENDER OPPORTUNITY FOR AKPO ICSS PACKAGE SPECIFIC MAINTENANCE CONTRACT (SMC)
NIPEX TENDER REF.: 1000005086

1. INTRODUCTION
AKPO INTEGRATED CONTROL AND SAFETY SYSTEM (ICSS) PACKAGE SPECIFIC MAINTENANCE CONTRACT (SMC)

MOBIL PRODUCING NIGERIA UNLIMITED
AN EXXONMOBIL SUBSIDIARY
OPERATOR OF THE NNPC/MPN JOINT VENTURE
TENDER OPPORTUNITY:
PROVISION OF FACILITY INTEGRITY CONDITION MONITORING SERVICES
NIPEX TENDER NUMBER: MPN-1000004837

1. INTRODUCTION
Mobil Producing Nigeria Unlimited (MPN) on behalf of Nigerian National Petroleum Corporation / MPN Joint Venture intends to carry out Facility Integrity Condition Monitoring of all her production facilities and equipment (onshore and offshore) to maintain reliability of such facilities and equipment through non-destructive examination. Offshore installations (fixed and floating platforms) are located in range of 20 to 80 km from the Qua Iboe Terminal in Akwa Ibom State.

MPN, therefore, invites Tenders from suitable and reputable companies with Corrosion Monitoring and Inspection experience to apply for pre-qualification for the subject project for an anticipated contract term of five (5) years plus one (1) year optional extension.

2. SCOPE OF WORK
Contractor shall be required to carry out comprehensive Integrity surveys in line with industry approved standards and as would be detailed in the bid package/contract. Availability to commence these services is required in fourth quarter of 2021. Interested contractors shall have relevant experience in comparable non-destructive inspection and integrity management services. In addition to fulfilling the above scope of work, contractors must be capable of providing the following services.

3. BIDDER’S RESPONSIBILITIES
(1) On stream or off stream, where applicable and as required, visual, ultrasonic, magnetic particle, dye penetrant, eddy current, thermography, radiographic testing or all other non-destructive examination services for MPN Joint Venture Operations. Services shall be performed on pressure equipment such as, vessels, storage tanks, risers, process/utility piping, heaters, heat exchangers, crane pedestals, underground piping systems, intra-plant piping, non-pressurized piping and equipment and structural components on marine vessels, fixed onshore and offshore locations.
(2) Perform Visual integrity inspections at MPN Joint Venture Operations (JVO) locations.
(3) Perform NDT integrity inspections at MPN Joint Venture Operations locations.
(4) Perform on/off-stream API 653 storage tanks inspections to include tank floor scanning and tank floor settlement survey.
(5) Perform positive materials identification (PMI).
(6) Perform hardness testing service on stream and off-stream equipment or components.
(7) Perform adhoc inspections upon request at any JVO location
(8) Perform Corrosion Under Insulation (CUI) inspections using suitable NDT methods.
(9) Provision of all inspection equipment and materials required for all applicable inspection techniques when required.
(10) Provide metallurgical, failure analysis and laboratory chemical analysis services
(11) Maintain formal inspection data quality assurance and quality control system. A standard inspection database shall be utilized.
(12) Provide integrity inspection or management services and solutions to specific integrity issues that cannot resolved by inspection techniques listed.
(13) Perform inspections of marine fleet in accordance to class requirements
(14) Train designated MPN personnel on the operations of the inspection tools, inspection methodologies, use of computing software for analysis/management of inspection data and fitness for service assessments.
(15) Provision of an inspection database management software/tool.

4. MANDATORY REQUIREMENTS
(i) To be eligible for this tender exercise, interested contractors are required to be prequalified in PROVISION OF PIPELINE FLUSHING, EXTERNAL/INTERNAL INSPECTION, PIGGING SERVICES: 3.07.02 Product Category in NipeX Joint Qualification Scheme (NJQS) database; ensure all prospective Tenderers’ are NJQS compliance and up to date at the Advert close date. All successfully prequalified suppliers in this category will receive Invitation to Technical Tender (ITT)
(ii) To determine if you are prequalified and view the product/service category you are listed for. Open http://vendors.nipex-ng.com and access NJQS with your log-in details, click on continue Joint Qualification Scheme tool, click check my supplier status and then click supplier product group.
(iii) If you are not listed in a product/service category you are registered with DPR to do business, contact NipeX office at 8/10, Bayo Kuku Road, Ikoyi, Lagos with your DPR certificate as evidence for necessary update within the stipulated Advert window.
(iv) To be eligible, all tenders must comply with the Nigerian Content requirements in the NipeX system